Let's get started!

Follow these easy steps to start…

1
Activate your Diffuser

1. Detach the Diffuser from the tool, then rinse it under warm water for about 20 seconds.

Activate Diffuser Step 2

2. Soak the Diffuser completely submerged in a glass of warm water for about 20 minutes.

3. Removing the Diffuser from the glass, repeat Step 2 and shake any excess water out.

4. Let the Diffuser sit out overnight (or at least 8 hours) so the VitaBeads can air-dry completely.

5. While the Diffuser is soaking and air-drying, wash out your bottle and cap with water and soap. Be sure to rinse out all of the soap. *Not dishwasher safe.

2
attach diffuser

7. Attach the middle piece of your tool so the tool can reach the bottom of the bottle.

attach diffuser

8. Attach the Diffuser to the tool by fitting the upside down L-shaped grooves on the tool over the two bumps on the top side of the Diffuser, then twist slightly to lock together. *Be sure the Diffuser is the right way up. The top side has two bumps near the edge, and the bottom side has four tabs near the edge.

attach diffuser

9. Using the Tool, insert the Diffuser into the bottle to align with the Diffuser holder at the bottom of the bottle. Push down to click the Diffuser into the holder.

attach diffuser

10. Unlock the Tool by lightly twisting counterclockwise, and pull straight up to release the Tool from the Diffuser.

attach diffuser
4

Already created a DYLN Account?

Register your bottle, give it a name, and keep tabs on your Diffuser so it's up-to-date

Register your Bottle
5

Enjoy & Share!

Testing your water’s pH

Testing the PH of your water

Here are some recommendations on how to correctly test the pH of your water:

pH Test Drops

Quality pH test drops are a quick and easy way to test the pH of water.

pH paper test strips

pH strips are intended and designed for measuring urine and saliva, not water or alkaline water.

Electronic pH Meter

Using a calibrated pH test meter will provide the most precise results.

Pool pH testing kits

This method will not give accurate or reliable results, because it is limited to an approximate pH range of 6.0—8.0.

Sports Caps & Bottom Guards

Shop Accessories

FAQs

Le nouveau double design mural cacheté du vide de la Bouteille DYLN Isolée peut garder des températures depuis jusqu'à 24 heures. Cependant, la Bouteille Isolée est destinée pour garder votre eau froide, plutôt que chaude. L'utilisation de l'eau chaude diminuera efficacement la durée de vie de VitaBeads.
La Bouteille DYLN Originale tient 25.4oz/750mL pendant que la nouvelle Bouteille DYLN Isolée tient 32oz/950mL d'eau dans le volume.
La Bouteille DYLN Originale est rendue du 316 acier inoxydable de qualité chirurgicale le plus haut disponible c'est non-magnétique et a la résistance de corrosion supérieure. La Bouteille DYLN Isolée est aussi construite d'autre part avec le même 316 intérieur d'acier inoxydable, ayant un 304 extérieur d'acier inoxydable de qualité de la nourriture plus durable. Nos Bouteilles sont BPA-libres, sans paquebots et se non-infiltrent.